Note: Below are listed responsibilities for grades E-4 (3) and E-7 (c) for this job. Paygrades E-1 through E-3 assist in these tasks
TM3
A. Ordnance/Component Maintenance/Operations
A4.001 Perform receipt and transfer inspections on weapons
A4.002 Prepare torpedoes for launch
A4.003 Conduct torpedo post-run maintenance
A4.004 Perform weapons maintenance
B. Small Arms Maintenance
B4.001 Maintain small arms (pistols, rifles and shotguns)
B4.002 Clean and inspect line throwing rifle adapter kits
B4.003 Maintain security force equipment
C. Torpedo Tube System Maintenance/Operations
C4.001 Conduct maintenance on torpedo tubes
C4.002 Conduct maintenance on torpedo doors
C4.003 Maintain and replace fire control cables and circuits
C4.004 Conduct torpedo prefiring tests
C4.005 Fire torpedo tubes from local and remote stations (including casualty procedures)
E. Test Equipment Maintenance/Operation
E4.001 Operate general-purpose test equipment
E4.002 Operate special-purpose test equipment
E4.003 Maintain Otto Fuel detectors
E4.004 Maintain test equipment and test set cables
E4.005 Clean, inspect and conduct operability check on torpedo setting panels (TSP)
E4.006 Conduct operability checks on torpedo presetters
F. Weapons/Component Handling
F4.001 Perform weapons handling evolutions (including recovery of expended exercise torpedoes)
F4.002 Package and unpackage weapons and components
F4.003 Conduct tube loads/down loads
G. Weapons/ Handling Equipment Maintenance/Operation
G4.001 Maintain, repair, and operate weapons hoists (hand chain, pneumatic, hydraulic, and electric
G4.002 Conduct maintenance on and operate weapons handling equipment
G4.003 Maintain, repair and operate bridge cranes
G4.004 Conduct maintenance on torpedo strikedown lift systems
H Magazine and Magazine Sprinkler Maintenance/Operation
H4.001 Inspect and test magazines and associated equipment
H4.002 Conduct maintenance on magazine sprinkler systems and associated components
H4.003 Inspect non-containerized ammunition stowage and securing devices
H4.004 Inspect and test magazine alarms
H4.005 Inspect magazine ventilation system components
H4.006 Inspect and test magazine eductor systems
H4.007 Inspect and maintain ready stowage lockers
I. Quality Assurance
I4.001 Conduct acceptance inspection on weapons and weapons component containers
J. Pneumatic/Hydraulic Maintenance
J4.001 Conduct maintenance on pneumatic systems
J4.002 Conduct maintenance on hydraulic systems
J4.003 Inspect, test and rebuild pneumatic and hydraulic valves and system filters
J4.004 Maintain pneumatic reducers
K. Electrical/Electronic Maintenance
K4.001 Conduct electrical checks (voltage, current, resistance, and continuity)
L. Technical Administration
L4.001 Review conventional weapons manuals prior to weapons evolutions
L4.002 Complete weapons maintenance data forms (CAR, TMIS, TMDER, etc.)
L4.003 Use drawings (blueprints, schematics, etc.)
M. Damage Control
M4.001 Perform torpedo/missile casualty procedures (simulated or actual)
M4.002 Maintain toxic and hazardous material spill lockers
M4.003 Maintain and test breathing apparatus
TM2
C. Torpedo Tube System Maintenance/ Operations
C5.001 Conduct torpedo tube inspections
C5.002 Install ordnance alterations
H. Magazine and Magazine Sprinkler Maintenance/Operations
H5.001 Repair magazine sprinkler systems
I. Quality Assurance
I5.001 Submit quality discrepancy reports (QDR)
I5.002 Conduct acceptance inspection on weapons and components
L. Technical Administration
L5.001 Inventory ammunition, weapons and components
L5.002 Maintain technical libraries
TM1
B. Small Arms Maintenance
B6.001 Coordinate familiarization firing for security forces
C. Torpedo Tube Maintenance/Operations
C6.001 Coordinate torpedo prefiring tests
F. Weapons/Component Handling
F6.001 Coordinate shipboard recovery of expended exercise torpedoes
F6.002 Coordinate weapons/component handling evolutions
I. Quality Assurance
I6.001 Coordinate and maintain QA material storage audits and
schedules
L. Technical Administration
L6.001 Supervise non-nuclear explosives handling and stowage programs
L6.002 Maintain and submit ordnance documentation reports
L6.003 Change safe combinations
TMC
A. Ordnance/Component Maintenance/Operation
A7.001 Coordinate online and offline weapons operations
I. Quality Assurance
I7.001 Monitor QA deficiency programs
L. Technical Administration
L7.001 Review, maintain and submit reports (TRP, TCP, ATR, etc.)
L7.002 Maintain weapons audit files
L7.003 Conduct physical security surveys
L7.004 Implement non-nuclear explosive handling and stowage training programs
L7.005 Requisition weapons and components
M. Damage Control
M7.001 Create, schedule, and implement weapons casualty drills